UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the right tools. It is important to know your type of handle and its spindle's length prior buying a double glazed replacement windows.

Older uPVC window handles have a spur that protrudes and locks over a wedge striker for cockspur. They can be left- or right-handed and should be compatible when replaced.

What kind of lock and handle do I need?

There are a variety of window handles made of upvc and locks, each with its particular advantages and uses. The type of handle you own will determine if the locking mechanism you have is effective and also if it is simple to open windows. Over time, and with regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and effective. In some instances, they may even be completely removed. It is essential to fix your window handles made of upvc as soon as you see they are falling off. This will help to avoid burglaries and protect your home from burglary.

It is a good thing that replacing your window handles made of upvc is a relatively simple task that can be completed by nearly anyone. You'll need some basic tools, but with the proper knowledge, it's simple and should take only a couple of minutes. To get started you must determine the type of handle and lock you have on your window and then find the perfect replacement.

Inline Espagnolette Handles

They are usually found on the sides of the window. They are flat and feature an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that goes through the centre of the handle, and into the frame of the window to activate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles have a single screw that secures the handle to the window frame and aren't as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be rotated to open the window and then tilted into the window to ventilate. Generally, they have a 7mm spindle at the back of the handle and are available in left and right handed versions.

It is essential to know the spindle's size prior to purchasing a replacement handles made of upvc. Not all are the exact same size. Drop something into the middle of the hole to check the length. This is the maximum size of spindle that will fit into your windows.

What is the spindle?

uPVC window handles operate in a similar manner like doors. By turning the handle, you are able to operate a latch within the frame. The window then opens and closed. However, sometimes the handles may become damaged, particularly when they are frequently used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they're not functioning correctly.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. This is why it is essential to know the kind of handle is installed on your uPVC window to get the correct replacement for it.

You can check what type of uPVC handle you are using by looking at the base section of your handle. There should be a'snap in' cover over one screw that holds the handle base in place. When you remove this cover you will be able to see the screw that holds the handle base in place. After both screws are removed then you should be able to take the handle out of the uPVC.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Note the length of the spindle. You'll need to buy a replacement of the same length as the handle that was originally used and locking device.

The spindle wears down and is unable to operate the locking mechanism. This could be due to wear and tear from continuous use, a loosening of the locking mechanism, or even corrosion over time. If this occurs, it is required to replace the window handle as well as the locking mechanism to restore complete functionality to your uPVC windows.

How do I remove the old handle?

In the course of time and daily usage, window handles could be damaged or destroyed, and when this happens, it is crucial to repair them as soon as possible to ensure the safety of your home. It is simple to replace a damaged or worn handle. The job can be completed in less than an hour without the need of special tools.

To remove the old handle, first remove the screw that is located at the bottom of the handle. After the screw is removed, the handle will be removed. Another screw will be located at the base of the handle. This can also be removed. When both screws are removed the handle can be completely detached from the base of the window.

After removing the old handle and fixing holes, align the holes of the new handle with the holes that are already in the window frame. There may be a tiny sticker or caps on the new handle, so remove these if necessary and then put the handle in its place. Once the handle is in place it is important to test whether it functions by turning the handle and making sure that the lock mechanism is activated.

Espag handles feature spindles that extend from the handle and slot into the multipoint locking mechanism that is on the frame of the window. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom bar crossmember.

Once you have the new handle in place, you can insert the spindle inside the window lock and then tighten it down. Once the handle is securely fixed, replace the'snap in' cover and the screw cap (if applicable). Once the handle is ready for use, you can open and close the window a couple of times to ensure it works correctly and securely.

How do I fit the new handle?

Changing your uPVC window handle isn't difficult, and the process is actually very simple. All you need is a screwdriver and a small amount of patience. First, make sure the old handle is unlocked. Then, remove any visible screws. You can also replace them with screw caps. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is crucial since it will determine the kind of handle you'll require to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. The spindle is inserted into the handle to activate the locking mechanism within the frame of the window. When the handle is turned, it opens the latch on the window and allows it to open. When used regularly and time, handles made of espagnolette can be damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are usually more secure than espagnolette handles as they can only be opened from the inside. They can be replaced using the same method as you would with espagnolette handles however, ensure that the new handle is angled and not flat.

After you have picked the correct handle, you can align the new handle with existing screw holes prior to screwing it into place. Then, put the screws on and test the new handle. You can accomplish this by moving the handle between the locked position to the unlocked one for a few times. It is possible to contact an expert to determine whether you can solve any issues. They can provide advice on how to resolve the issue in a timely and effective manner.