Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the installing ghost immobiliser Immobiliser. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This will allow your vehicle to begin.

Simple PIN code change process

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking device can assist in finding your vehicle in the event of theft, it will not stop the crime from occurring in the first place. Immobilisers, on the other hand is exactly what says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your car.

Utilizing the buttons already in your car, the ghost device creates an unique sequence that must be entered prior to the engine starts. This can be done via the indicator stalk windows or heater buttons. Additionally option, there is an app on mobile that can act as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is a great option if you want to give your car to valet parking or for maintenance. The immobiliser will stay active.

The Ghost is an innovative and unique device that works by using the buttons of your vehicle instead of as a separate unit. This means that it is not just a powerful deterrent against vehicle theft but can also be transferred to any future vehicles you have, making it more of an investment than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key cloning and hacking. It also prevents ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices that are a popular technique used by thieves to bypass immobilisers.

The advantage of using CAN data is that it operates in a silent manner compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as identified by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console or door panels, to create a unique disarming sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app permits one, authorized connection with a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start when a valid PIN code has been entered. It can be temporarily operated in valet or service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can hand your car to valet or service without having to enter the code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to disable the system of your vehicle from performing its normal start-up routine until you input an individual passcode. The system can be activated or deactivated by using your smartphone app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder, which is embedded in the key. This transmits a signal to the ECU. If the correct code is transmitted the car will start however if the transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to start and be stolen. A South African company that is at the forefront of vehicle safety systems technology created the ghost immobiliser problems (Https://valetinowiki.racing/) immobiliser. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away could a thief get it and not be able to drive the vehicle.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, and the door panels, to generate an individual PIN code that needs to be entered to use your vehicle. This is done without the need for additional hardware like a key-fob and can be up to 20 presses long. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle to ensure that it can't be disabled or removed by thieves. It is also harder to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your car after it's been taken.

Emergency PIN code override

You don't have to look very far on social media for stories or videos of vehicles that were stolen using the most advanced technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without the original key fobs.

Our Ghost immobiliser fights this and gives you an additional layer of protection to stop your vehicle from being taken when it is targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel and centre console. The unique pin code must be entered in conjunction with your original key fob to stop the vehicle from beginning. The unique PIN for override is on the black card that you will receive following your installation and is easy to remember as there are no LED indications.

The device is hidden within the vehicle's wiring and does not emit radio signals. This means it can't be detected by diagnostic software that can tell the security system you have installed. This makes it a fantastic alternative to a tracker.

In contrast to other security systems that rely on a relay located in the engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to a separate analogue alarm immobiliser or tracker. This should be specified prior to installation. They are also service/valet-mode compatible and a great alternative to a tracker if you are you have your car checked for repair at the dealers.

Service/Valet mode

In recent years there has seen an increase in the number of cars being stolen from owners without keys. It's now easier than ever before to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent, since it doesn't use radio frequencies or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also protects against adding an additional key or replacing the ECU to bypass the system as only the correct PIN code will allow the engine to start.

The device is hidden within your car, using buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being started or driven away without a PIN code being entered before. If the device is activated and you attempt to drive away, it will display an indicator on your dash which will flash continuously for about 300m, if you enter your PIN code during this time, it will disable the anti-hijack device and your car ghost immobiliser will continue to drive in the normal way. If you do not enter your PIN at this time the indicator will continue to flash and require a new PIN code each time you attempt to start your car.