UPVC Window Handle Replacement

Replacing a damaged window handle is a easy process, and with the right tools it can be done quite quickly. But it's essential to know your handle's type and spindle's length prior buying the replacement.

Older uPVC window handles have a spur which protrudes and locks over a cockspur wedge striker. These can be either left or right-handed and need to be replaced with the same handle.

What kind cost of windows replacement lock or handle do you have? I have?

There are many different types of window handles made from upvc and locks, each having their distinct advantages and functions. The type of handle you are using will determine how easy it is to open your windows and if the locking mechanism functions in the way you want it to. With time and regular usage, the window handles made of upvc may become damaged or worn out, making them less secure and effective. In some instances, they may even disappear completely. It is essential to fix the handles on your window made of upvc immediately if you see they are falling off. This will help prevent potential break-ins and keep your home safe.

It's a task that almost anyone can do. You'll need a few tools, but with right knowledge, it is an easy task that will only take a few minutes. You will need to be aware of the type of handle or lock that you have on your window. This will help you choose the appropriate replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle that goes through the center of the handle and then into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame and are not as secure as other kinds of window handles.

Tilt and Turn Handles

As opposed to the other handles made of upvc that are tilt and turn, these handles can be rotated to open the window, and tilted inwards for ventilation. They feature a 7mm spindle at the back and are available in right and left-handed versions.

When buying replacement upvc handles, it is important to check the spindle length as not all are identical in size. To test the length of your upvc handle, simply drop something in the middle of the hole, and then measure how far it extends before it reaches an obstruction. This is the maximum size of spindle that will fit in your glass windows replacement.

What is the spindle?

uPVC window handles operate in a similar manner like doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, so that it can be closed and opened. The handles can become damaged, especially if often used or are exposed to harsh conditions. You may have to replace the handles on your uPVC window if they are not functioning correctly.

There are several different types of uPVC handles that are available, including Espag, Cockspur and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.

You can check what type of uPVC handle you are using by taking a look at the base of the handle. There should be a "snap in cover' over one screw which holds the handle base in place. Once you remove this and you'll be able to see the second screw that holds the handle base in position. After both screws are removed you should be capable of pulling the handle away from the uPVC window.

After taking off the uPVC handle, carefully remove it from the locking mechanism. Take careful note of the length of the spindle as you'll need to make sure that you buy an alternative that is the same length as the original handle and locking mechanism.

The primary issue with uPVC window handle problems is that the spindle gets worn out and cannot longer function properly with the locking mechanism. This can be due to damage caused by constant use, a loosening of the locking mechanism or even rust over time. If this happens, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off the handle that was previously attached?

Window handles can become damaged or even broken over the course of time. It is crucial to fix them as soon a possible to ensure your safety. Fortunately, replacing a damaged or worn handle is a relatively simple job that can be accomplished in less than a minute and doesn't require any special tools.

To remove the old handle, you first need to remove the screw that is located at the bottom of the handle. After this screw is removed, the handle will be pulled away from the base. A second screw will be located at the bottom of the handle. This can also be removed. Once both of these screws are removed, the handle can be removed from the base portion of the window.

After removing the handle and fixing holes, align the holes of the new handle to the holes that are already in the window frame. If there is a cap or sticker on the new handle remove it if required and put the handle back in place. Once the handle is in place, it is crucial to verify whether it functions by turning the handle and ensuring that the lock mechanism activates.

Espag handles have spindles that extend from the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.

After you have put in the new handle, place the spindle into the window lock and tighten it. When the handle is fixed in place and secured, replace the snap-in cover and screw cap (if applicable). When the handle is in use, open and close the window a couple of times to make sure that it functions correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult, and the process is quite simple. All you need is a screwdriver and a little bit of patience. First, make sure the handle is not locked. Remove any screws visible. You can also replace them with screw caps. After removing the handle, you'll need to record the length of the spindle which extends from the back. This is important as it will determine the kind of handle that you will need to buy.

Espagnolette handles that are made of uPVC are the most sought-after type of handle. They have a spindle that is connected to the handle, and is responsible for a locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. When used regularly and over time, handles made of espagnolette can be damaged.

Cadenza handles are a type of uPVC handle that is usually employed with tilt and turn windows. They have a protruding blade that operates an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles as they are only accessible from the inside. They can be replaced using the same method as espagnolette handles but you must make sure that the new handle has a curved blade instead of flat ones.

Once you've decided on the correct handle to purchase, you can simply place the new handle with the screw holes and then screw it into the appropriate position. Then, you should put the screw covers on and test your new handle. This is done by moving the handle from the locked to the unlocked position and the reverse direction a few times. If you experience any issues, it could be worthwhile contacting a professional to determine if they can assist in resolving the issue. They are often able to advise you on the best approach to solve the issue in a fast and effective way.