Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil upvc Window repair doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. However when windows with double glazed window repairs panes are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance, you will need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to try to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. You'll first need to close the window repair near me and perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze It could be the hinges that are at the fault. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It's very simple to change a window hinge but it's much easier if someone helps you to hold the frame.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation at the factory. Sending us photos through our website can often resolve the problem. We are always happy to offer assistance.

It is also important to ensure that the hinges are lubricated regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become misaligned due to wear, creating a gap where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more economical to replace them than repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as you can.