Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. However when windows with double glazed window repairs near me panes are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need to locate some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you're planning to attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the door and the window is large, you might prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your upvc window repairs near me window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles could also become loose. Most often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and do a test fitting. The corner joints of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window repair. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges at fault. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is an easy process but it can be easier to do if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window repair near me hinges can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be happy to give you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form where the sash meets the frame. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window and can also become misaligned, again it's possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes filled with some type of filler. They can be placed on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.