Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This can be caused by a variety of problems, such as dirty tracks or poorly aligned sliders.

Start by cleaning the track and lubricating the rollers. You can also re-align the rollers using the adjustment holes on the bottom of the movable door panel.

Dirty or Damaged Track

A sliding door that does not slide smoothly could result from an unclean or damaged track. Over time, dirt, grit, and even rust may accumulate making the track unable to move smoothly. The solution is to thoroughly clean with an abrasive and mild detergent. This process should be carried out regularly to ensure smooth operation and to prevent expensive repairs in the future.

A door that is leaky is another common issue that requires prompt attention to prevent water damage, mold growth and structural deterioration. The issue is usually caused by worn weather stripping and misaligned doors. This can be corrected by replacing the old weather stripping and aligning the doors.

Another issue that can be solved with a bit of DIY work is the problem of rollers that veer off the track. Get a partner to assist you with this task because the door may be heavy. Sit inside the house and lean a panel toward you to move the rollers. To prevent the panel from falling, place it on sawhorses once it's been lifted off the bottom track. Then, loosen each roller's screws and remove them with the help of a screwdriver. Then, you can clean any dirt that is stuck between the wheel and tracks. Clean each wheel by rubbing denatured alcohol on a rag. Reposition the wheels back to their tracks and then attach them once more.

It is possible to straighten bent track sections with a mallet made of rubber and a block of wood. If the bent section is close to hinges or is likely to cause further damage, you should call in an expert.

Rollers that are not aligned

If your sliding door is experiencing difficulty sliding, it is likely that the roller wheels are not aligned correctly. The wheels could be dirty, rusted or their bearings are worn out. This friction causes the door to catch and grind when opened or closed. This can also cause squeaking sounds.

Fortunately it's a simple fix. The wheels are mounted on a bracket which can be adjusted, which means you don't need to take off the door. Use a screwdriver to find the holes for adjustment on the frame (usually either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue to adjust the door until it is open and shuts effortlessly.

It is essential to adjust the wheels prior to adjusting the latch. For the lock to function correctly the latch hooks need to be aligned with the strike plate. If you do not do this the latch could open or close by accident when you're out of the room.

Patio doors that slide are an investment, and making sure they are functioning correctly helps keep your family safe and secure. By addressing common issues like damaged tracks, rollers or handles, you can avoid expensive who repairs sliding patio doors in the future. Contact our team for more information about patio doors. We can assess your sliding patio door repair needs and help you keep it in good shape. Our experts can also help with any replacement parts that you might require.

The door frame is loose or damaged

Sliding patios doors are a great option for any home. They are a practical and attractive alternative to hinged or swing-open doors for patios. However, like any other hardware doors, they can experience many issues over time. Many of these issues are easy to fix with a little DIY skills.

A gap in the frame is a common issue with sliding patio doors. This could be due to a number reasons, including misaligned track or rollers, a damaged door or track, or a bent door frame. Most of the time, the cause of this issue is easily remedied by taking the door off and reattaching the track or rolling elements. This should be done with care to not cause damage to the track or frame.

In certain situations, it could be necessary for the entire track to be replaced. This can be accomplished easily using the universal kit that is readily available at major hardware stores. These kits are easy to install and will have your door operating properly again in no-time.

It is crucial to check the frame of your sliding door and hardware for signs of wear and tear, for instance loose screws or bolts. They can usually be tightened with a screwdriver or wrench which makes this a simple and effective DIY patio door maintenance procedure. Additionally, it is important to oil your rollers and tracks to make sure they operate smoothly and to prevent premature wear.

For many homeowners, their patio doors are the main entrance to their backyard and outdoor living space. They need to be able to function correctly to ensure the safety of their homes and provide security. By taking the time to implement these easy DIY maintenance steps, homeowners can prolong the lifespan of their sliding patio doors and reduce the cost of repairs or replacements.

A faulty handle

patio door lock repair doors that slide open are a great way to access your backyard and also enter your home, however they aren't always easy to operate if misaligned or damaged. A damaged handle could cause the door to become stuck or difficult to open and close. The good news is that fixing a loose handle is a simple task that can be accomplished at home.

In many cases, a loose grip is the result of screws that have slipped out of the backplate. To remedy this problem you can simply tighten the two screws that are on the inside of the handle using a screwdriver. If the handle remains loose, it could be an indication that the threads are worn out and require replacement.

A broken latch could be the cause. This is more likely to occur if the latch is made of plastic, not metal. You can try making sure the latch is lubricated if it is not catching, or turning. If this does not work, you may need to replace the lock.

If the handle is cracked or broken, it can be difficult to operate. If this happens it is necessary to replace it with a new handle that matches the style of your sliding patio door.

If your patio door locks repair doors are outdated and old or new and brand new, Feldco can help you get them back on the right track. We have doors of high-quality in various sizes and styles that can be adapted to perfectly fit your home. Contact us today for more about our products! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

If you're seeing light around windows and doors that are closed or you feel a draft pushing against the window or door It's time to change your weather stripping. These strips create a secure seal that blocks unwanted air, pests, and water from getting inside your home. They also help keep your conditioned and heated air inside, saving you money on your energy bills all year long.

It could have lost its strong seal, bouncy, due to aging. It is easy to determine this by running a dollar note under the seal on the top and bottom of the jamb and door frame where they overlap. If the dollar bill slides effortlessly between the seal and the door then it's time to replace the weather stripping.

If you replace only the worn-out portion of weather stripping, this could cause problems in the future with the seal. It's far more effective to replace the entire stripping so that you can be confident that your door is sealed once more.

Follow our DIY guide for weather stripping and install the correct material for your sliding patio door and frame, to ensure a tight and lasting seal. This is a great way for you to save money on your energy bills and fix your sliding patio door. Don't wait until its too late. You'll save money and improve the appearance of your home.