Cat flaps let your cat go in and out at their own pace, without having to let them in or out. They also prevent your cat from urinating in the house.

Installing a cat flap on the door panel made of upvc is much simpler than installing one in a glass door, however it requires some knowledge and the right tools.

Take a measurement of the door

Installing a cat flap on a door can be tricky but as long as you choose the right type of cat flap make sure you take your time and follow the directions provided, it shouldn't be a problem. We will show how to trace the shape, use a jigsaw to cut out the door's opening and then finish off the job by fixing the cat flap to the door. This will ensure that the flap remains in place and protects the doors from the damage caused by rain and wind.

The first thing to do is measure the width of your pet to get a precise measurement of what size of cat flap you will require. This will enable you to choose a cat flap that is large enough for your pet to enter the house and leave without having to open the door every time.

Once you have the measurements you can mark the area on the door where the template should be positioned, typically this is done using an X, however some kits include a drawing that shows the location to drill, if you have one, then attach it to the door and use a pencil to draw around it. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and these elements.

Then put on your eye protection and dust mask. Then using a jigsaw begin cutting along the line that you penciled in, don't try to press the blade too hard as this could make it cut faster than you would like it to. If you have an already-cut square, use it to check whether you're cutting in the right way and to ensure that the hole is a proper rectangle shape, once you are satisfied with the shape, you can start to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet inside and out without worrying about unwanted visitors or unwanted gifts. It also prevents drafts and helps to keep the temperature inside your home steady. Fitting a cat flap to your door can be a daunting task to those who haven't tried it before. Many people call a professional carpenter or joiner to complete the work. This is an option but you can do it yourself if your tools are right and the directions are adhered to.

While this is much easier to do when using a timber door it is still possible in uPVC doors, but you must be careful not to scratch the doors with cat flap, as this can cause damage to your warranty. The first step is to take measurements of the door to ensure it will accommodate the new cat-flap. This isn't too difficult for a standard uPVC door, but you may need to take more care if you have an insulated or composite kind of door, as they can be more difficult to cut into than solid uPVC panels.

The next step is to determine the size of your cat's belly. This is the measurement from the floor to the underside of the cat's stomach, and you'll need locate a place on the door where this measurement is within the range that your pet can comfortably go through. Once you have the information you'll need to mark the area with a spirit-level and a pencil, so that you are sure that the hole will be suitable for your cat.

After you've marked the area, it's now time to cut the hole. You will require the jigsaw, and it is important that you take your time in order to ensure that the cuts are clean and smooth rather than uneven and rough, as it could cause damage to your door. You should also remember to wear safety glasses and a dust protection mask when using the jigsaw, as breathing in the dust could be harmful to your health. Once you have completed the cutting process, you will have to smooth out the edges of the hole with sandpaper so that your cat flap can be fitted easily in place.

Make a hole

It can be a challenge to put the cat flaps for french doors flap onto the door panel or double glazing cat flap glazing unit. You might be tempted to do it yourself, but unless have a lot of experience in DIY it is probably best to get a professional to do the job for you. A shoddy job might not only look ugly, but also an enigma for security and also allow cold air to enter when the cat is outside, and hot air to escape when inside.

The first thing to do is draw the location of the hole in the door with pencil and an ax level. This will ensure that it is properly located and is in a straight line with the other components of the door. Make sure to have sandpaper on hand to smooth any rough edges.

Wear any safety equipment you'll need to use the power tool. If you're worried about noise, you can purchase a jigsaw with a cord that is quieter and more user-friendly.

It is essential to only remove the material required for the fitment of the cat flap. It is necessary to leave a little extra material to cover the wall of the flap. However, removing too much can cause problems or even damage the frame of the door.

If the upvc door is made of metal, or has a frame, it could interfere with the microchip flap. In this scenario you'll need to create an extra-large hole to ensure that the metal doesn't get in contact with the walls of the flap.

If you want to install a cat flap into a double-glazed or upvc window with metal frames, you'll need to consult a specialist. They can provide you with a brand new piece of glass with the hole already pre-made for the cat flap. It will be much cheaper to do this than to attempt to fix a cat flap into an existing glass pane that has not been manufactured specifically for the purpose.

Fit the Flap

Cat flaps let your pet leave and come at their own pace, giving them the ability to unwind in the home whenever they want to. If you have an uPVC front door, it may be hard to install the cat flap. This is especially the case if you do not own glass panels that is cut. If you're looking to install a half-glazed uPVC replacement panel, it's possible to install the cat flap. It's not as simple as just making a hole in the door though and there are some things you'll need first to make sure it's safe.

A upvc door panels with cat flap, GRP or composite door panel is typically made up of an flimsy plastic outer layer bonded to a soft insulating polystyrene core. The material is extremely fragile and care must be taken when cutting into it to avoid damaging. This type of door comes with a template that you can use to cut the hole.

Once you've determined the location of the hole in your door, now it's time to install the flap. You can choose from a variety of designs, from simple push-button flaps to microchip activated ones that allow your pet in. However, no matter what type of cat flap you select, it is essential to ensure that your cat can use the flap without getting stuck outside in the rain.

A circular fitting cat Flap in upvc door panel is more effective than a square, because circles can be cut more securely into glass. This is because square holes can leave the glass vulnerable to cracking if drills are used on it. It's also a safer option to use as you don't risk having to drill into toughened glass that might break and hurt your pet or family members. This is particularly important if there are children or elderly people at home who might be injured by glass fragments.