Sliding patio door repair service Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This can be due to many issues like dirty tracks or misaligned sliders.

Clean and lubricate your rollers. You can also re-align the rollers using the adjustment holes on the bottom of the door panel that can be moved.

Tracks that are damaged or dirty

A sliding door that does not slide smoothly could be caused by an unclean or damaged track. Over time dirt, grit and even rust could build up and block the track from being able to slide smoothly. The solution is a thorough cleaning with an abrasive and mild detergent. This job should be done regularly to ensure a smooth operation and avoid costly who repairs sliding patio doors in the future.

A leaky door is a common issue that requires prompt attention to prevent the growth of mold, water damage and structural degradation. The problem is often caused by worn weather strips and misaligned door. This can be rectified by replacing the old weather stripping and aligning the doors.

Another issue that can be solved with a bit of DIY work is the problem of rollers that veer off the track. This task can be difficult so you may need a helper to help you. Sit inside the house and lean a panel toward you to reposition the rollers. To stop the panel from falling, put it on sawhorses when it's been removed from the bottom track. Then, loosen each of the roller's screws and then pry them out using a screwdriver. It is now possible to remove any dirt that is caught between the wheels and the tracks. Clean each wheel by rubbing denatured alcohol on a cloth. Reposition the wheels back to their tracks and attach them once more.

It's possible to straighten bent sections of track with a rubber mallet, and a block of wood patio door repair. If the bent section is located near hinges or has the potential to cause more damage, you should seek out an expert.

Rollers that are misaligned

If your sliding door has problems with sliding, it is likely that the roller wheels have been misaligned. The wheels may be dirty, rusted, or their bearings are worn out. This creates friction between the floor of the door and the track, causing it to snag or grind when it's opened or closed. This can also trigger the sound of squeaking.

This is a straightforward fix. You don't need to remove the door to access the wheels, since they are on a bracket that is adjustable. Locate the adjustment holes (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. By turning the screw clockwise, you raise the wheel, while turning it counterclockwise lowers it. Continue adjusting until the door moves smoothly and quietly when open or closed.

It is important to adjust the wheels prior adjusting the latch. The latch hooks must align with the strike plate (the opening into which the latch locks) in order for the lock to work properly. If you don't do this, the latch may open or close accidentally when you're out of the room.

Patio doors that slide are a significant investment, and making sure they are working properly will keep your family safe and secure. By fixing common issues such as broken tracks, rollers and handles, you can prevent expensive repairs in the future. If you need help with your patio doors, get in touch with our team. We can evaluate your sliding patio door repair needs and assist you in keeping it in top condition. Our experts can also assist with any replacement parts you might require.

The door frame is loose or damaged

Sliding patio doors are a wonderful option for any home. They offer a convenient and attractive alternative to hinged or swing-open patio door options. Like all hardware items sliding patio doors are prone to develop problems in time. Fortunately, most of these issues are easy to fix with a bit of DIY expertise.

A gap in the frame is a frequent problem with sliding patio doors. This can be caused by a variety of factors, such as a an improperly aligned track or rollers, a damaged track or door, or a bent frame for the door. Most of the time, the cause of this issue can be resolved by removal of the door and reconnecting the track or rolling elements. It is important to be cautious not to cause damage to the frame or track.

In some cases it may be required for the entire track to be replaced. This can be accomplished quickly and easily with the universal kit that is readily available at major hardware stores. These kits are simple to install and will get your door working properly in no time.

It is essential to regularly inspect your sliding door frame and hardware for signs of wear and tear, like loose bolts or screws. This is a straightforward and effective DIY patio maintenance procedure that can be accomplished with the help of a screwdriver. It is also important to oil your rollers and tracks to facilitate smooth operation and prevent premature wear.

For many homeowners, their patio doors are the primary entrance to their backyard and outdoor living space. In order to maintain security and comfort in the home, it is important that they function correctly. By following these easy DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and save money on repairs or replacements.

A faulty handle

Patio Glass Repair doors that slide open are the perfect way to access your backyard and enter your home, however they aren't always easy to operate if they are damaged or misaligned. A damaged handle could cause the door not to open or close properly. Fixing a loose handle could be done at home.

In many instances the reason for a loose grip is a result of screws that have fallen out of the backplate. To remedy this problem just tighten the two screws on the inside of the handle with the help of a screwdriver. If you notice that the handle is loose, it could be a sign that the threads have worn and will need to be replaced.

A broken latch may be the reason. It is more likely that the latch will break if made of metal, rather than plastic. If the latch is not catching or turning you can try oiling it first to see if it aids. If this doesn't work, you may have to replace the lock.

If the handle is damaged or broken, it can be difficult to use. If this is the case it is necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.

Feldco can help you restore your patio door lock repairs doors back to their former glory, whether they are brand new or old-fashioned. We have a variety of high-quality patio doors in various sizes and styles. To learn more about our products, call us today! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Unusual Weatherstripping

If you're noticing light coming from closed doors and windows, or you feel a draft pulling on the window or door It's time to change your weather stripping. The strips form a tight seal that blocks unwanted air, pests, or water from getting into your home. It also helps keep your conditioned and heated air inside, thereby saving money on energy bills year-round.

It could have lost its strong, bouncy seal due to age. It is easy to determine this by running a dollar note under the seal at the top and bottom of the jamb and the door frame where they meet. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.

It's tempting to remove just the worn area of weather stripping and replace it, but this can leave cracks on each side of the new piece and could cause issues with the seal in the future. It is much more effective to replace all the stripping. This will let you rest at ease knowing that your door will be sealed properly.

Follow our DIY guide for weather stripping to put the correct material for your sliding patio door, and frame, to ensure a tight, lasting seal. It's a great method to fix your door and reduce your energy bill, so don't wait until it's too late. You'll reduce your expenses and enhance the appearance of your home.