Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum or timber.

Regularly cleaning and upvc repair lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window replacement near me frame.

If you plan to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, upvc repair leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, upvc repairs window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and reduce its energy efficiency.

Verify that the drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also be misaligned due to wear, creating gaps where the sash meets frame. They can be repaired by giving them good clean, but if they are beyond repair it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it's possible to give them a clean but in certain cases, it may be necessary to have them replaced.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.