Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double glazed window repairs near me-paned windows that are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window repairs frame.

If you plan to try to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is significant, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows to reach the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also become loose. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, old caulking may have to be removed. When it comes to uPVC repair, you should avoid 'over-caulking'. This can make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass of your Double Glazed Window Repairs Near Me-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be easier to do with someone else to help you hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or double glazed Window Repairs near me by improper installation in the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. They can be repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc window you should consult an expert immediately.